Back to all

Automotive Tips from Tuffy Fort Wayne - Coldwater: Serpentine Belt System Wear

September 27, 2020

The primary job of the serpentine belt for Fort Wayne drivers is to provide important traction to spin the accessories. As the belt wears it loses some of its grip and the accessories may not spin at optimal speeds. For example, if your alternator doesn’t spin fast enough, the battery will not completely recharge while you’re driving and you could end up stranded around Fort Wayne with a dead battery.

In short, a worn serpentine belt will stress all of the accessories it powers leading to premature wear and possible early replacement. When as little as 5% of belt material is lost, the serpentine belt cannot provide the proper traction for the accessories. Your friendly and professional Tuffy Fort Wayne - Coldwater service advisor can inspect your belt for excessive wear and replace your serpentine belt system if it’s excessively worn.

Give us a call.

Tuffy Fort Wayne - Coldwater
4501 Coldwater Rd.
Fort Wayne, Indiana 46825
260.483.2236

More articles from Tuffy Fort Wayne Coldwater Rd

When Your Tires are Tired (Tire Replacement)

February 16, 2025

Tires are so reliable these days that few drivers pay much attention to them. But tires wear out. They have a tough job since they are the only point of contact between your vehicle and the road. They have to get your vehicle going from a stop, keep it going, make sure it is headed in the dire... More

Timing is Everything (Timing Cover Replacement)

February 9, 2025

Theres an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road. Its called the timing cover. Its important because the timing belt or chain is what coordinates parts of your engine called the camshaft... More

U and your U-Joints (Lubricate U-Joints)

February 2, 2025

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More