Back to all

Automotive Tips from Tuffy Fort Wayne - Coldwater: Tire Replacement Overview

August 30, 2016

Tires are an expensive purchase, so knowing when tires should be replaced is important for Fort Wayne drivers. Tires will just wear out with normal use. The depth of the tread on your tire determines how well it will stop, start and steer – especially in wet conditions. 4/32th of an inch (3.2 mm) of tire tread is considered a safe amount of tread.

Uneven tread wear can be a symptom of other problems, and simply replacing your tires will not prevent the same uneven wear from happening to the new tires. At Tuffy Fort Wayne - Coldwater in Fort Wayne, we can inspect your tires for excessive or uneven wear. Unusual wear may lead to further inspection of steering, suspension or alignment problems. We can help with necessary repairs and with getting you the right tires for your needs.

Give us a call.

Tuffy Fort Wayne - Coldwater
4501 Coldwater Rd.
Fort Wayne, Indiana 46825
260.483.2236

More articles from Tuffy Fort Wayne Coldwater Rd

When Your Tires are Tired (Tire Replacement)

February 16, 2025

Tires are so reliable these days that few drivers pay much attention to them. But tires wear out. They have a tough job since they are the only point of contact between your vehicle and the road. They have to get your vehicle going from a stop, keep it going, make sure it is headed in the dire... More

Timing is Everything (Timing Cover Replacement)

February 9, 2025

Theres an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road. Its called the timing cover. Its important because the timing belt or chain is what coordinates parts of your engine called the camshaft... More

U and your U-Joints (Lubricate U-Joints)

February 2, 2025

If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More