February 7, 2017
A good suspension system gives a vehicle a smooth, even ride while providing Fort Wayne drivers with good handling and control. But like any system on your vehicle, parts of the suspension system can wear out, leading to a lower ride quality and safety concerns. So it's a good idea for drivers in Fort Wayne to remember their suspension system in their schedule of preventive maintenance. Springs do most of the work of the suspension system. The most common types of springs are coil and leaf, but air springs and torsion bars are becoming more common. The body of the vehicle is “suspended” by the springs.
If springs were the only working component in your suspension system, however, you'd spend your travel time bouncing up and down like a bobblehead. That's where your shocks come in. They keep the rebound, or bounciness, of the springs under control. Shocks also keep your tires on the road, which keeps the driver in control of the vehicle. Some vehicles have struts in their suspension system. Struts are a compact combination of springs and shocks. They do the same job but in a single package.
Shocks wear out gradually, so it can be difficult for Fort Wayne drivers to notice when they need to be replaced. There's no definitive point when a vehicle's ride goes from "smooth and controlled" to "a bit imprecise." To check if your shocks or struts are worn, you should first do a visual inspection on them. If they are leaking fluid, they need to be replaced.
There are other less obvious signs that your suspension system needs attention. For example, an uneven, cupping wear on your tires may indicate that your shocks are worn. If your vehicle feels “floaty” when you turn, or, in other words, you don't feel that you have full control of the vehicle, you should check your shocks. Also, if the front end of your vehicle dips noticeably when you stop, it's time for new shocks.
Your owner's manual gives recommendations on how often the shocks should be checked, usually between 15,000 and 30,000 miles (24,000-50,000 km). If one of your shocks does need to be replaced, you should replace all four. This will keep your suspension even and ensure good handling of your vehicle. If you carry heavy loads, tow a trailer or drive on uneven Fort Wayne area terrain, you might also consider upgrading to a heavy-duty shock.
Regular shocks contain hydraulic fluid. The fluid helps them absorb the bumps or “shocks” of the road so the impact doesn't transfer to the vehicle's body. Premium shocks are filled with compressed nitrogen gas, which costs more but does a better job of controlling body motions. Regular shocks can develop air bubbles that reduce their effectiveness; the premium shocks don't have this problem. So if you want higher handling performance, if you drive off-road around Indiana or if you just want added comfort, you should consider upgrading to premium shocks or struts.
Replacing struts can put your vehicle out of alignment, so an alignment check should always follow this type of repair. Talk to your service advisor at Tuffy Fort Wayne - Coldwater in Fort Wayne for more information.
Tuffy Fort Wayne - Coldwater
4501 Coldwater Rd.
Fort Wayne, Indiana 46825
260.483.2236
February 16, 2025
Tires are so reliable these days that few drivers pay much attention to them. But tires wear out. They have a tough job since they are the only point of contact between your vehicle and the road. They have to get your vehicle going from a stop, keep it going, make sure it is headed in the dire... More
February 9, 2025
Theres an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road. Its called the timing cover. Its important because the timing belt or chain is what coordinates parts of your engine called the camshaft... More
February 2, 2025
If your vehicles power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicles engine to deliver its power through a driveshaft to make the rear wheels rotate. You need U-joints because the surfa... More